- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
- 受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
落球回弹试验仪,介电击穿强度测定仪:多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
粉体综合物性测试仪
-
氧化铝流动角测定仪
-
塑料表观密度测试仪
-
普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动时间测定仪
-
压实密度粉末电阻率仪
-
陶粒砂体积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高相电压小电压电流测试仪(耐电弧放电测试仪)-(换算机操作)
High voltage low current tester (arc resistance tester) - (computer control)
设备明称:耐电弧试验机
Product name: electric arc resistance tester
產品型号规格:NDH-A
Product model: NDH - A
满足需要基准:GB/T 1411-2002《固状耐压材料耐高放低工作电流电孤自放电的检测》(一样IEC 61621-1997)及ASTM D495等标准规范的的标准设置加工制造的,并符合要求IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
最主要适合条件及功用:
本现场实验机是采用应用到调速电机、家电和小型家电等市场的焊工用橡胶、聚酯树脂胶胶和隔绝漆等隔绝素材的耐脉冲能力鉴定,主用到物质隔绝素材如:橡胶、pe膜、聚酯树脂胶、云母片、瓷器、夹丝玻璃、隔绝油、隔绝漆、硬纸板等媒介的耐脉冲能力测试仪;
本疲劳试验装置由算出机控制运转,行现示现阶段科学科学试验所模式及科学科学试验所时候,科学科学试验所结束后后并存储现阶段科学科学试验所参数,并可彩印.标淮科学试验申请书。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该机为前后左右整体构成,下部分为进行电脑操作系统,顶部为实验室检测箱。
2 本类产品进行*新自动化的控制技艺,完成选软件程序(IEC或ASTM)可手动去实验室检测,并在电脑手机上上体现试验台过程中和数据。
3 **特性优秀,抗抑制作用强,公测准确度就越高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 弧光通断時间误差值:乘以 ±10ms
2 调压器存储空间:2kVA
3 载荷系数试验台电压值:12.5kV
4 校正相电压高精准度:±3%
5 交流电调节高精准度:±10% 瞬时电流在线测量精确度:1.5%
6 金属电极对制样压差:(0.5±0.05)N
7 参比电极材质:钨棒
8 电级长距离:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 运行坏境温:(23±2)℃
10 实用区域环境空气湿度:(50±5)%
11 电原:220V±5% 50Hz
12 实验室检测 工艺: 标准/美标/10 mA 连继/20 mA 多次/30 mA不间断/40 mA持续
13 测试程序流程图下述:
| 程度段 | 脉冲感应电流 mA | 脉冲通断时期s | 各步骤段快速准确时间s | 检验总时期s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 间隔通 | 60 | 240 | |
| 5 | 20 | 间隔通 | 60 | 300 | |
| 6 | 30 | 多次通 | 60 | 360 | |
| 7 | 40 | 不间断通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 顺序号 | 明称 | 的数量 | 微信备注名 |
| 01 | 耐脉冲测试方法仪 | 一辆 | |
| 02 | 探针平台 | 一整套 | |
| 03 | 探针支承 | 买套 | |
| 04 | 开关电源电览 | 整套 | |
| 05 | 跨接放** | 每支 | |
| 06 | 直流电压毫安表 | 台 | |
| 07 | 电脑上测控APP | 整套 | |
| 08 | 试件材料架 | 一只 | |
| 09 | 参比电极路程规范块 | 2块 | |
| 10 | 立场标准块 | 2块 | |
| 11 | 卫浴陶瓷片 | 2片 | |
| 12 | 喷墨印刷机 | 1台 | 牌子 |
| 13 | 计算公式机 | 1台 | 产品 |
| 14 | 食用说书 | 1份 | |
| 15 | 合格品证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 软件类型:
NDH-A 耐电弧焊接耐压仪-微机管控
NDH-B 耐弧光试验台仪-接触屏设定
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!