落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高额定电压小直流电压校正仪(耐电弧焊接校正仪)-(换算机操纵)

High voltage low current tester (arc resistance tester) - (computer control)

类产产品称谓:耐电弧试验机

Product name: electric arc resistance tester

好产品尺寸:NDH-A

Product model: NDH - A

需要满足条件:GB/T 1411-2002《固态物绝缘带用料耐高放低交流电脉冲蓄电池充电的冲击试验》(一样IEC  61621-1997)及ASTM D495等基准的特殊要求制作生产加工的,并遵循IEC 149、UL 746A等实验设计技巧

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主耍可用于範圍及功能性:

本试验装置机是遵照使使用在发电机、家电和生活费家电等制造业的焊工用塑、树酯产品胶和接地漆等接地产品的耐弧光耐腐蚀性考核评价,主使用在粉末状接地产品如:塑、聚酯薄膜、树酯产品、白云母、瓷砖、波璃、接地油、接地漆、瓦楞纸板等导电介质的耐弧光耐腐蚀性检测;

本耐压机由计算方式机掌握加载,可不可以提示眼下工作调查性操作睡眠状态及调查性操作日子,调查性操作开始和结束后并导出眼下工作调查性操作数据资料,并可复印.标准实验室申请书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为左右侧分立式形式,上面为操作的软件系统,上面为做实验的时候箱。

2 本的产品分为*新智力有效控制工艺,利用会选择源程序(IEC或ASTM)可系统自动采取实验设计,并在笔记本上界面显示实验设计时候和可是。

3 **效能优良,抗打扰水平强,測試可靠性强,精密度不高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 焊弧通断時间误差值:低于 ±10ms

2 调压器余量:2kVA

3 稳定试验检测输出功率:12.5kV

4 实验室检测电阻值计算精度:±3%

5 瞬时电流控住精密度:±10%  交流电自动测量gps精度:1.5%

6 电极材料对坯料压:(0.5±0.05)N

7 金属电极物料:钨棒

8 金属电极多远:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 选择区域体温:(23±2)℃

10 利用自然环境空气相对湿度:(50±5)%

11 供电:220V±5%  50Hz  10A

12 测试    方式 :   执行标准/美标/10 mA 累计/20 mA 连着/30 mA接连/40 mA不断

13 试验台系统软件相应:

程序流程段

电弧放电瞬时电流

mA

焊弧通断时s

各程度段坚持的时间s

耐压试验总日期s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

间断性通

60

240

5

20

间断通

60

300

6

30

不间断通

60

360

7

40

不断通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

编号

明称

数据

自己的名字

01

耐电孤公测仪

一架

 

02

电级机系统

两套

 

03

参比电极支架

一款

 

04

交流电源电揽

做一套

 

05

与地面放**

一根

 

06

交流电毫安表

一辆

 

07

手机测控图片软件

这套

 

08

试件材料架

一瓶

 

09

工业的距离规则块

2块

 

10

层面原则块

2块

 

11

陶瓷厂家片

2片

 

12

喷墨打印文件机

1台

产品品牌

13

求算机

1台

加盟品牌

14

选择介绍书

1份

 

15

优秀证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 商品型号查询:

NDH-A    耐焊弧检测仪-微机把控好

NDH-B    耐焊弧实验室检测仪-触控屏控制

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪